How to cut 50 degree angle on miter sawPositive Miter Stops: – Quick adjustment positive stops at the most common angles 0°, 15°, 22.5°, 31.6°, 45°, 60°, and 67.5° left and right. Specifications 4000 rpm, 12-inch Blade and 15-amp motor
The miter angle can work up to 60 degrees on the right side while 50 degrees on the left side, and this is perfect. The miter scale has an acceptable easement or the notches on a common angle. The small level on the side of the button will neglect the easement.
Hitachi C10FCH2 is a single bevel miter saw you can make angle cuts to the left side of the saw blade in the middle of 0 to 45°. Also, you can make miter cuts in the mid of 0 to 52° with it. Rearranging is extremely simple between these angles to make accurate cuts.
It is called a compound miter saw because the base of the saw or the table can be rotated both left and right to allow the saw to cut at different angles or miters, other than 90. Also the saw head and blade itself can be bevelled in either direction depending on the type of saw, so that you can make bevel cuts with it.
Plus, great compact sliding miter saws deliver a full cross-cut on up to 2×12 material or a 45-degree miter on 2×8. One area that we were able to set the saws apart was on narrow dado cuts. These are common cuts for carpenters that result in a perfectly cut trench in the workpiece, usually used for joinery.